Sensors
Besides the temperature-, motion-, light-, infrared- sensors and -detectors that can be built into the smart switches, there are also several stand-alone detectors in the Qbus product range.
Product variants
Motion, light and temperature sensor for indoor and outdoor
A multifunctional detector for wall or cieling mounting, for indoor or outdoor use (IP65) which can detect temperature, light level and temperature and which can control 4 outputs based on one or a combination of these measured values. Could e.g. be used to turn on the lights when there's movement and the light level is lower than X, or roll out the sunscreens when the light level is more than Y and the temperature is higher than 22 celsius.
Downloads
SEN04MLT/EYE
Technical Datasheet
Motion Detectors
Motion Detectors for inside and outside use.
Downloads
MDI01 Niko / Bticino
Technical Datasheet
Air Quality Detectors
The CO2 content in an area is determined by the number of people present. Through the CO2 detector, the CO2 concentration in an area is measured in terms of which the ventilation system can bring fresh air into the room and evacuate the bad air. A CO2-driven decentralized ventilation system ensures optimal air quality without unnecessary energy loss.
The air quality in an area is determined by the concentration of (depending on number of persons), humidity (number of people, cooking, showering,...) and temperature.
Qbus has a series of air quality detectors - the AIR01 detectors. These exist in a version with CO2 and temperature sensors, humidity and temperature sensors and CO2, humidity and temperature sensors.
Based on the measured values from these sensors, the ventilation system can be controlled and optimal air quality can be obtained without unnecessary energy loss.
Downloads
AIR01CT
Measures the CO2-concentration and temperature in a room based on which the ventilation is regulated
AIR01CHT
Measures the CO2-concentration, Humidity (RH%) and temperature in a room based on which the ventilation is regulated
AIR01HT
Measures the Humidity (RH%) and temperature in a room based on which the ventilation is regulated