Dimmers

 

Every light source can be dimmed with an extensive range of dimmers. Qbus has dimmers that can be used on their own, or dimmers that can only be used in a Full Qbus installation.

 

Create moods and save energy

 

With the Stand-Alone dimmers incandescent lights,
halogen lamps, energy saving lamps, LED lamps and
LED strips can be dimmed. DALI or DMX frames
can also be controlled in a Full Qbus installation.

Four channels (Stand- Alone) universal dimmer (DIM04SA)

Dimmers

DIN rail module to dim 4 circuits of 10-500VA. For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and...

DIN rail module to dim 4 circuits of 10-500VA. For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used Stand-Alone (without controller) as there are 5 direct inputs on board for
the connection of standard push buttons (including an All Off & Panic button).

Two channels (Stand- Alone) universal dimmer (DIM02SA)

Dimmers

DIN rail module to dim 2 circuits of 10-500VA.For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and...

DIN rail module to dim 2 circuits of 10-500VA.For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used Stand-Alone (without controller) as there are 3 direct inputs on board for
the connection of standard push buttons (including an All Off & Panic button).

Stand-Alone DALI Broadcast Module (QDBC02SA)

Dimmers

Dimming 2 DALI light circuits in a simple, affordable way without programming. Up to 64 DALI devices distributed over 2 DALI circuits. Control via...

Dimming 2 DALI light circuits in a simple, affordable way without programming. Up to 64 DALI devices distributed over 2 DALI circuits. Control via standard pushbuttons, including one All Off button and Panic button. Qbus Stand-Alone module usable with or without controller

Four channels (Stand- Alone) analogue control module for dimming and/or switching (ANR04SA)

Dimmers

DIN rail module. Has 4 outputs that can be used as
analogue dimmers (0/1-10V or PWM) or as relay outputs. This module can also be used...

DIN rail module. Has 4 outputs that can be used as
analogue dimmers (0/1-10V or PWM) or as relay outputs. This module can also be used Stand-Alone (without
Controller) as there are 5 direct inputs on board for the connection of standard push buttons (including
an All Off & Panic button).

Four channels analogue DIN rail dimmer (ANA04)

Dimmers

Analogue dimmer module. DIN rail module to connect
4 analogue dimmers with feeds of 0-10 or 1-10V

Decentralised one channel analogue dimmer (ANA01)

Dimmers

0/1-10V dimmer with 1 output that is decentralised connected to the bus

Decentralised constant light control dimmer (CLC01)

Dimmers

Decentralised module powered by the bus, with a light sensor that continuously measures the light level. The difference between the desired and...

Decentralised module powered by the bus, with a light sensor that continuously measures the light level. The difference between the desired and actual light level is then adjusted by the CLC01 by dimming the connected lighting more or less.

Qbus Dali Interface (QDI01)

Dimmers

DIN rail Module to connect the Qbus system to a DALI-system (max. 64 addresses). Allows easy control and visualisation via the familiar Qbus...

DIN rail Module to connect the Qbus system to a DALI-system (max. 64 addresses). Allows easy control and visualisation via the familiar Qbus control panels (switches, detectors, Cloud, EQOmmand...) a DALI system.

Qbus Dali power supply (QDIPWS)

Dimmers

Dali system power supply