Motor control modules

 

With a Qbus system the rolling blinds can be closed both
centrally and de-centrally, both with and without positioning.


Controlling motors, positioning slats

 

With the Qbus motor control modules, standard 230V
motors can be operated; you control your curtains or rolling blinds and screens and sun awnings can be automatically positioned according to sunlight, rain or wind, etc.

Control module for 2 motors with positioning (ROL02P)

Motor control modules

On a ROL02P DIN rail module two 230V motors can be connected for the operation of rolling blinds, curtains, ... Every motor can be set between 0%...

On a ROL02P DIN rail module two 230V motors can be connected for the operation of rolling blinds, curtains, ... Every motor can be set between 0% and 100% of the running time; that setting can then be used in moods and time settings.
An internal calibration mechanism in the ROL02P ensures that every time the rolling blind or curtain is fully lifted or lowered, it is calibrated. That ensures that the requested position also remains the same after time.

Decentralised control module for 1 motor (ROL01)

Motor control modules

The decentralised ROL01 module takes power from the bus and can easily be installed in the proximity of the motor. The ROL01 module also has...

The decentralised ROL01 module takes power from the bus and can easily be installed in the proximity of the motor. The ROL01 module also has two inputs on board (with two LED outputs) through which push buttons (with LED feedback) window, door and other contacts can be connected.