Motor control modules

 

With a Qbus system the rolling blinds can be closed both
centrally and de-centrally, both with and without positioning.


Controlling motors, positioning slats

 

With the Qbus motor control modules, standard 230V
motors can be operated; you control your curtains or rolling blinds and screens and sun awnings can be automatically positioned according to sunlight, rain or wind, etc.

Decentralised control module for 1 motor (ROL01)

Motor control modules

The decentralised ROL01 module takes power from the bus and can easily be installed in the proximity of the motor. The ROL01 module also has...

The decentralised ROL01 module takes power from the bus and can easily be installed in the proximity of the motor. The ROL01 module also has two inputs on board (with two LED outputs) through which push buttons (with LED feedback) window, door and other contacts can be connected.

Control module for one motor (with or without lamellae) with positioning (ROL01PSA)

Motor control modules

DIN rail module. For controlling one motor. With three inputs: 1 for UP, 1 for DOWN, 1 All Off / Panic button. For controlling 230V motors...

DIN rail module. For controlling one motor. With three inputs: 1 for UP, 1 for DOWN, 1 All Off / Panic button. For controlling 230V motors for screens, roller shutters, blinds etc, includes alarm contact for a weather sensor connection so that the UP output is activated with too much wind/rain etc. Module can be used both Stand-Alone and combined with a controller (Full Qbus)

Control module for 2 motors with positioning (ROL02P)

Motor control modules

On a ROL02P DIN rail module two 230V motors can be connected for the operation of rolling blinds, curtains, ... Every motor can be set between 0%...

On a ROL02P DIN rail module two 230V motors can be connected for the operation of rolling blinds, curtains, ... Every motor can be set between 0% and 100% of the running time; that setting can then be used in moods and time settings.
An internal calibration mechanism in the ROL02P ensures that every time the rolling blind or curtain is fully lifted or lowered, it is calibrated. That ensures that the requested position also remains the same after time.

Control module for 4 motors (with or without lamellae) with positioning (ROL04PSA)

Motor control modules

DIN rail module. For controlling four motors. With nine inputs: 1 for UP, 1 for DOWN for each motor outplut, 1 All Off / Panic button. For...

DIN rail module. For controlling four motors. With nine inputs: 1 for UP, 1 for DOWN for each motor outplut, 1 All Off / Panic button. For controlling 230V motors for screens, roller shutters, blinds etc, includes alarm contact for a weather sensor connection so that the UP output is activated with too much wind/rain etc. Module can be used both Stand-Alone and combined with a controller (Full Qbus)