Catalog

DIN-rail Module to connect the Qbus system with a DALI (2) system (max. 64 addresses). Supports RGB(W) and WWCW on DALI (DT8). Allows for easy control and visualization of a DALI system via the familiar Qbus control panels (switches, detectors, Cloud, EQOmmand ...).

DIN-rail stand-alone Qbus Dali Group Dimmer for 4 groups with built-in power supply, supporting up to 64 DALI(2) drivers. With this Qbus DALI Group Controller, you can easily control up to 4 lighting groups on a single DALI bus. The module can operate both in stand-alone mode and with a Qbus controller. It features four buttons on the front for operation of the groups and configuration in stand-alone mode. The module is also equipped with an ECO relay, allowing the power supply to be cut off in systems where this is possible.

DIN rail module to dim 2 DALI lighting circuits, without programming. Dims up to 64 DALI devices distributed over 2 DALI circuits. Operated via standard push buttons, including an All Off and Panic button. The module can be used both stand-alone and in combination with a controller (Full Qbus)

The DIM02SA/500U is a DIN-rail module, suitable for dimming 2 or 4 loads of 10-500VA. It can be used with incandescent lamp, halogene lamps, capacitive loads, inductive loads, certain dimmable energy-savings lamps and dimmable 230V LEDs. This module can function both Stand-Alone (so WITHOUT Controller, WITHOUT external power supply) but can also be connected to a Controller to become part of a full-fledged Qbus installation.

High-frequency dimmer for LED strips from 12 - 48V. With 4 outputs for dimming monochrome/WarmWhite-CoolWhite/RGB/RGBW LED strips. Combines dimmer and driver functionality. Qbus Stand-Alone DIN-rail module usable with and without a controller

DIN-rail module. Features 4 outputs that can be used as analogue dimmers (0/1-10V or PWM) or as relay outputs. This module can also be used Stand-Alone (without Controller) as there are 5 direct inputs for connecting standard buttons (including an All Off & Panic button).

0/1-10V dimmer with 1 output, connected decentrally to the bus.