SENPACK/1LEVEL
Package with analog input module and liquid level meter(s)
In the SENPACK LEVEL, the entrance module INA02 is combined with the Qbus 4-20mA liquid level meter to detect water or fuel levels between 5cm and 300cm. The measured values can be translated into a 0-100% value, thermostat mode, or when other granular data is needed, the universal mode can also be applied. Available with 1 or 2 liquid level meters.
SEN04MLT/OUTW
Outdoor motion, light, and temperature sensor
Multifunctional detector for wall or ceiling mounting, for indoor or outdoor use (IP55), that can detect temperature, light level, and movement and control 4 outputs based on one or a combination of these measured values. Available in white (SEN04MLT/OUTW) and black (SEN04MLT/OUTB)
SEN04ML/RMW
Swivelling motion sensor in round metal frame
The SEN04ML/RMW is an indoor motion detector, featuring an adjustable detector and is built into a metal frame with clamps for easy wall or ceiling installation. The SEN04ML/RMW has a range of 7 meters within an angle of 110°.
SEN01T
Temperature sensor
Digital temperature sensor, SEN01T, for easy and multifunctional installation (hollow walls, baseboards, ..). These sensors are powered by the Qbus bus and make smart, zonal heating control in a building extremely simple.
SEN01NTC
Temperature sensor with NTC sensor
The SEN01NTC is a temperature sensor on a 55cm cable. For installation in pipes or floors, both in dry and wet environments. This sensor is powered by the bus and can be used for temperature measurement in underfloor heating, swimming pools, ...
SENMoLi/TB
Smart motion and light sensor - surface-mounted
The smart motion and light sensor (SENMoLi) is a bus-controlled and powered sensor. With its variants for both built-in and surface mounting, it is highly suitable for ceiling installation in residential projects such as toilets or living spaces. The SENMoLi is available in white (SENMOLI/TW) or black (SENMOLI/TB) finish.
SENMoLi/RB
Smart motion and light sensor
The smart motion and light sensor (SENMoLi) is a bus-controlled and powered sensor. With its variants for both built-in and surface-mounted applications, it is very suitable for ceiling installation in residential projects, e.g., toilets or living spaces. The SENMoLi is available in white or black finish.
SENMax/RW
Smart sensor for motion, light, and air quality
The SENMax is a bus-controlled and powered all-in-one sensor with motion and light detection, as well as CO2, humidity, and temperature measurement. This makes the sensor highly versatile for use in a wide range of applications. Think of large commercial and residential projects such as doctor's offices or schools where CO2 measurements are required. This sensor is available in both built-in and surface-mounted versions.
SEN01Mx/RMx
Mini motion and light sensor in round metal frame
Design detector with built-in light sensor in a white or black metal frame with clips for easy ceiling mounting. The sensor has a range of 7 meters at an angle of 110°. Available in white (SEN01MW/RMW) and black (SEN01MW/RMB)
SEN01MB
Mini motion and light sensor
The design detector SEN01M is a small motion detector that can be integrated into skirting boards, cabinets, walls, etc. The SEN01M also has a built-in light sensor and a range of 7 meters at an angle of 110°. Available in white (SEN01MW) and black (SEN01MB)
QWZ-TH
Qbus wireless Zigbee thermostat
The QWZ-TH is a 230V powered room thermostat that can be linked to the Qbus Wireless Interface using Zigbee protocol (QWI/ZB). Thanks to the QWZ-TH room thermostat, you can control both the heating temperature and the fan speed of a fan. The module features 3 relay contacts for direct control of a fan with 3 speeds. In addition, there is a potential-free contact for heating and a potential-free contact for cooling available.
QDSEN/HB
DALI High-Bay motion and light sensor
The Qbus Dali Sensor High Bay is a combined passive infrared (PIR) motion detector and a light sensor, suitable for installation at a maximum height of 15 meters with a detection range of a 40-meter diameter.
QDSEN
DALI Motion and Light Sensor
The Qbus Dali Sensor is a combined passive infrared (PIR) motion detector and a light sensor, and connects directly to the DALI bus. The DALI sensor (QDSEN) is suitable for installation at a height of 2.5m with a detection range of 7m in diameter.
MDI01/N
Motion detector with Bticino design
Adjustable indoor motion detector with a built-in light sensor. The MDI01/N is compatible with Bticino cover frame (not included). The MDI01/N has a range of 7 meters at an angle of 110°.
MDI01/101
Motion detector with Niko design
Adjustable indoor motion detector with a built-in light sensor. The MDI01 is compatible with a Niko cover frame (not included). The MDI01 has a range of 7 meters at an angle of 110°.