Catalog

New

LQS06SA

Luqas Smart Energy Management Module (6 Functions)

With Luqas, the smart electricity manager (LQS06SA), you can read, visualize, and intelligently control your energy flows via the digital meter. With Luqas, you can reduce the power of your charging station, heat pump, or boiler during periods of overconsumption, or store the energy generated by your solar panels.

QFRAME/USB

Built-in USB Adapter for QFRAME

The QFRAME/USB is a 230V powered USB adapter for the QFRAME from Qbus. This USB adapter provides 12W (2.4A maximum) power for different types of iPads. The power cable of the iPad (included with the QFRAME) is hidden behind the tablet thanks to its built-in connection.

New

Smart switches Sumum

Behind the Sumum push buttons is the Qbus circuit board. Easy to connect to the Qbus bus. Switches are available in 1, 2, 3, or 4 buttons with or without temperature sensor. All push buttons have adjustable colored LEDs. Through the convenient second page, it is possible to operate a total of 8 outputs with one 4-button switch. For more information, you can visit https://www.sumum.be/

Lithoss

Smart Switches Lithoss

Behind the Lithoss push buttons is the Qbus circuit board. Easily connectable to the Qbus bus. All push buttons have adjustable colored LEDs. Via the convenient second page, it is possible to control a total of 8 outputs with a single 4-button switch. For more information, contact the wholesaler or Lithoss.

CJC

Smart Switches CJC

Behind the CJC push buttons is the Qbus circuit board. Easily connectable to the Qbus bus. All push buttons have adjustable color LEDs. Through the handy second page, it is possible to control a total of 8 outputs with one 4-key switch. For more information, contact the wholesaler or CJC.

UbieTouch8BL

UbieTouch 8" touchscreen display

This 8-inch capacitive color touchscreen allows intuitive operation of a Qbus installation. It features a built-in speaker and smart microphone for optimal audio recording and can also serve as an indoor unit for a video intercom system (linked with a SIP outdoor unit). The screen is POE powered and requires a wired network. The UbieTouch can also be placed on an optional metal holder.

Ubiebox/KNX

Ubiebox Gateway between Qbus, KNX and IoT devices

Through Ubiebox/KNX, it is possible to connect your KNX system with your Qbus system, allowing you to control your Sonos music systems, Philips Hue lighting, smart thermostats, smart doorbells, etc., as if they form a single unit.

Ubiebox

Ubiebox Gateway between Qbus and IoT devices

Through the Ubiebox, it is possible to operate Sonos music systems, Philips Hue lighting, smart thermostats, smart doorbells, ... as if they form a single unit.

SWC04T/GW

4-button Tastu glass switch with temperature sensor

This version of the Tastu® glass switch only works as part of a Full Qbus installation. The functions of the buttons on the Smart Tastu® are determined during the configuration of the Full Qbus system. This version has a built-in temperature sensor so it can serve as a room thermostat.

SWC04T/101

4-key Niko switch with thermostat

Behind the Niko push buttons is the Qbus circuit board. Easy to connect to the Qbus bus. All push buttons have adjustable color LEDs. This version also has a built-in temperature sensor. Through the convenient second page, it is possible to control a total of 8 outputs with a single 4-button switch.

SWC04MT/100

3-key Niko switch with motion sensor + thermostat

Behind the Niko push buttons is the Qbus circuit board. Easy to connect to the Qbus bus. All push buttons have adjustable color LEDs. This version also has a built-in temperature sensor, motion detector, and light sensor. Through the convenient second page, it's possible to control a total of 8 outputs with a single 4-key switch.

SWC04MT/***

3-key Niko switch with motion sensor + thermostat Non-Standard

Behind the Niko push buttons is the Qbus circuit board. Easily connects to the Qbus bus. All push buttons have adjustable color LEDs. This version also has a built-in temperature sensor, motion detector, and light sensor. Through the convenient second page, it is possible to control a total of 8 outputs with a single 4-key switch.

SWC04M/100

3-key Niko switch with motion detector

Behind the Niko push buttons is the Qbus circuit board. Easily connectable to the Qbus bus. All push buttons have adjustable color LEDs. This version also includes a built-in motion detector and light sensor. Through the convenient second page, it is possible to control a total of 8 outputs with one 4-key switch.

SWC04M/***

3-key Niko switch with motion detector Non-Standard

Behind the Niko push buttons is the Qbus circuit board. Easy to connect to the Qbus bus. All push buttons have adjustable colored LEDs. This version also has a built-in motion detector and light sensor. Through the convenient second page, it is possible to control a total of 8 outputs with a single 4-key switch.

SWC04T/NNB

4-key Niko switch without finishing set

A plug & play smart switch with 4 buttons that can be directly connected to the 2-wire bus cable, without a finishing set. Available with/without temperature sensor.

SWC04/JNB

4-key JUNG switch

The intelligent Qbus switch in the JUNG version is a basic component on which various styles of JUNG buttons and cover frames fit (AS500, A, CD500, LS). These buttons and cover frames must be ordered separately . Through the JUNG Graphic Tool, it is also possible to print the buttons with symbols. All buttons have adjustable color LEDs. With the convenient second page, it is possible to control a total of 8 outputs with one 4-button switch.

SWC04/GB

4-button Tastu glass switch

This version of the Tastu® glass switch only works as part of a Full Qbus installation. The functions of the buttons on the Smart Tastu® are determined during the configuration of the Full Qbus system.

SWC04/101

4-button Niko switch

Behind the Niko push buttons is the Qbus circuit board. Easily connectable to the Qbus bus. All push buttons have adjustable color LEDs. Through the convenient second page, it is possible to control a total of 8 outputs with one 4-button switch.

SWC02T/GW

2-key Tastu glass switch with temperature sensor

This version of the Tastu® glass switch only works as part of a Full Qbus installation. The functions of the buttons on the Smart Tastu® are determined during the configuration of the Full Qbus system. This version has a built-in temperature sensor so it can serve as a room thermostat.

SWC02/GW

2-key Tastu glass switch

This version of the Tastu® glass switch only works as part of a Full Qbus installation. The functions of the buttons on the Smart Tastu® are determined during the configuration of the Full Qbus system. Available in white and black finishes.

SWC0102T/NNB

1-2 key Niko switch with thermostat without finishing set

A plug & play smart switch with a temperature sensor that can be directly connected to the 2-wire bus cable, without a finishing set. The same module can be used as a 1-button or 2-button.

SWC0102/NNB

1-or 2-key Niko switch without finishing set

A plug & play smart switch that can be connected directly to the 2-wire bus cable, without a finishing set. The same module can be used as a 1-button or 2-button.

STQ10

Start to Qbus Pack

Start to qbus for a basic installation with 12 switched circuits and 2 universally dimmed circuits, to be controlled remotely, including "all-off" and panic button, presence simulation, astronomical clock, scenes, logic, ...  Content: - 1 Qbus controller with ethernet, microcontroller up to 100mA- max. 9 modules (CTD10) - 3 smart contactors (3 x REL04SA) - 1 smart universal dimmer 10-500vA (DIM02SA)

SER485/Modbus

Modbus interface

Module to integrate Qbus with devices that have a Modbus (SER485) port. The Modbus data from various devices (Daikin, Toshiba, Mitsubishi, Fujitsu, Priva, Robur) is standard in the Qbus module, for others the code must be added by Qbus.

SER485/DMX

DMX interface

The Qbus DMX interface allows you to control all possible DMX devices (spots, moving heads, LED panels, LED strips,...) via the Qbus system. Select the desired color via a color wheel on the Cloud, play a "video" with color transitions via a Qbus switch, or let your RGBW strips dance along with the Party atmosphere.

SENPACK/1LEVEL

Package with analog input module and liquid level meter(s)

In the SENPACK LEVEL, the entrance module INA02 is combined with the Qbus 4-20mA liquid level meter to detect water or fuel levels between 5cm and 300cm. The measured values can be translated into a 0-100% value, thermostat mode, or when other granular data is needed, the universal mode can also be applied. Available with 1 or 2 liquid level meters.

SEN04MLT/OUTW

Outdoor motion, light, and temperature sensor

Multifunctional detector for wall or ceiling mounting, for indoor or outdoor use (IP55), that can detect temperature, light level, and movement and control 4 outputs based on one or a combination of these measured values.  Available in white (SEN04MLT/OUTW) and black (SEN04MLT/OUTB)

SEN04ML/RMW

Swivelling motion sensor in round metal frame

The SEN04ML/RMW is an indoor motion detector, featuring an adjustable detector and is built into a metal frame with clamps for easy wall or ceiling installation. The SEN04ML/RMW has a range of 7 meters within an angle of 110°.

SEN01T

Temperature sensor

Digital temperature sensor, SEN01T, for easy and multifunctional installation (hollow walls, baseboards, ..). These sensors are powered by the Qbus bus and make smart, zonal heating control in a building extremely simple.

SEN01NTC

Temperature sensor with NTC sensor

The SEN01NTC is a temperature sensor on a 55cm cable. For installation in pipes or floors, both in dry and wet environments. This sensor is powered by the bus and can be used for temperature measurement in underfloor heating, swimming pools, ...