Skip to main content
QSD01 KBB
QSD01K/BB

Aluminum SIP videophone door station with 1 call button and numerique keypad

  • Qbus SIP video intercom door station with numeric keypad
  • Connects to the Qbus Control app via the SIP protocol
  • Finished in anodized brushed black aluminum with a glass plate for the 140° camera
  • Camera is equipped with automatic night vision
  • Available in both flush-mount and surface-mount versions
Technical info

The Qbus SIP videophone door station with numeric keypad. Available as flush-mounted and surface-mounted. Connection is established with the Qbus Control app via the SIP protocol. This app is available on smartphone, tablet, computer,... The door panel is finished in anodised brushed black aluminium with a glass plate for the 140° camera. The camera is equipped with automatic night vision. The door panel is available as flush-mounted and surface-mounted.

Frequently Asked Questions

  • How do you read an existing configuration?

    This is a completely different procedure depending on the type of controller.

    • For the CTD controllers this goes as follows:

    In the SMIII via "File" or "Utilities / Setup / SD card", click on "Recover QDB from SD".

    After confirmation you choose the name and location where the file should be saved. The zipped QDB file is then read from the SD card of the CTD and saved. With a positive answer to the question "Unzip and open restored QDB?", All data will then be immediately available. If the data you were still working on was not sent or saved, you will first receive a notification to do so.

     

    • For a CTL controller follow the following procedure:

    Because this controller does not yet have a large memory, only limited data can be recovered. Ao the names are abbreviated to 12 characters and serial numbers are not stored anywhere.

    The first step is therefore to type in ALL serial numbers via SMII via "File / Modules". These 6-digit serial numbers can be found on every module (DIN rail, switch, detector, etc.). For the SWC0x switches, an extra option was provided to have them send their serial number via “Search for modules”.

    When you then click on the "down arrow", you can read all this limited information.

  • Always use the latest software for configuration.

    It is always recommended to use the most recent version. This version supports the newest modules and resolves all known bugs.

    If, for example, you enter a serial number and the correct module information does not appear, you are likely not working with the most recent software.

    A newer version will always be able to open the older files (.QDB) without data loss.

    The latest version of the System Manager software, along with the user manual and version history, can be found in the knowledge center.

Technical info for installers

  • Function description

    The Qbus video intercom door station combines technology and design. With a single press of a button, it connects to the Qbus Control App, allowing a notification to appear on the smartphone, tablet, or any other device running the app. Thanks to the early-media technology, you can see who is at the door before answering the call. When the call is answered, both audio and video connections are established, allowing you to speak with the guest and, if desired, grant access.

    The 140° camera is subtly integrated behind the glass panel. A light sensor automatically switches the camera to night mode when needed. 

    Relay contacts: 2 contacts available.

    The Qbus door station also considers design: the combination of black anodized brushed aluminum and black glass adds extra appeal to any facade. 

    The Qbus door station is available in a version with 1 call button (QSD01/BB) and a version with 1 call button and code keypad (QSD01K/BB), which can control relays.  The included mounting box is used for both flush and surface mounting. 

    The microphone volume can be adjusted independently of the speaker volume.

  • Technical specifications

    General Specifications 

    • Ambient Temperature:

    Operating Temperature: -30°C to 65°C 

    Storage Temperature: -40°C to 70°C 

    • Maximum Humidity: 90%, non-condensing
    • Power Supply: 12Vdc (1A)  or POE

    Physical Specifications:

    • Protection Rating: IP65
    • Mounting Dimensions (h x w x d): 202mm x 102mm x 31mm
    • Videophone (h x w x d): 216mm x 116mm x 36mm
    • Weight: approximately 139g.

    CE: 

    • Qbus declares that this product complies with all applicable European directives and regulations.
    • The EU Declaration of Conformity is available upon request.
  • Sizing
  • Explanation of symbols
    Symbool Dubbele isollatie

    Equipment where protection against the risk of electric contact is not only based on basic insulation but also on additional protection such as double insulation or reinforced insulation. There is no possibility for grounding.

     

    Symbool Gevaar Aandachtig lezen

    Before connecting the device, it is mandatory to read the manual of the respective product. ISO7000-0434

    Symbool Gevaarlijke spanning

    Power supply connection (230V) to the power supply connector. IEC 60417-5036

    Symbool CE

    CE conformity. All declarations of conformity are available upon request.

  • Warranty Provision

    2 years from the date of delivery. The warranty becomes void if the module has been opened! The warranty period is extended by 2 years if it was installed by a certified Qbus installer.

    In case of defects, Qbus support should be contacted by a certified installer. After registration with Qbus support, the defective module can be sent, unsealed and with a description of the defect, to our Qbus support.

    Contact details:       

    Qbus NV

    Joseph Cardijnstraat 19

    B-9420 Erpe-Mere

    Tel: +32 (0)53 60 72 10

    Fax: +32 (0)53 60 72 19

    Email: support@qbus.be

General

  • Safety Regulations

    Read the complete manual before installing and activating the module.

    WARNING

    • The video intercom must be installed, started, and maintained by a certified electrical installer in accordance with the applicable legal requirements of the country.
    • Before working on the video intercom, the power supply must be turned off.
    • Never connect external voltages (e.g., 230Vac) to the video intercom! This will cause irreparable damage!

Installation and wiring

  • Installation

    The video intercom can be either built-in or surface-mounted.

  • Power Supply

    The video intercom can be powered by an external 12V DC SELV power supply or via POE (Power Over Ethernet).

  • Connect

    Position the mounting frame on or in the wall with the integrated slot facing downward. It is recommended to maintain a height of 1.40m from the bottom of the frame to the ground.

    Ensure the UTP cable for the network, without a connector, is present at the location, as well as a cable for the electric lock or a separate 12V DC power supply if required.

    Slide the cover plate over the cables and attach an RJ45 connector to the UTP cable.

    Connect the UTP cable to the video intercom and the separate cable to NO – COM of relay A or relay B. It is always best to open a door lock via an INP module.

    Close the cover and use the appropriate cable grommet with seal plate to ensure the video intercom is waterproof. Mount the assembly with the 6 provided bolts.

    Now place the video intercom in the housing and secure it with the 4 supplied Torx anti-theft bolts in the housing using the included screwdriver bit.

    Detail aansluiting QSD01 en QSD01 K

The configuration of this device is identical to the configuration of QSD01/BB.

This device has a code keypad with which you can operate a relay contact to, for example, activate a door lock.

  • Setting up the code keypad

    Setting up users 

    In the menu, go to Intercom - User.
    On this page, a time-bound schedule can be set up for when which relays can be switched and with a corresponding keypad code.

    Videofoon uitgebreid Gebruikers 1
    1. Create a new user with the Add button:
    Videofoon uitgebreid Gebruikers 2
    1. User ID: Provide an Id and name for identification.
    2. Name: Provide an Id and name for the user.
    3. Code: Enter a code to switch the relays.
    4. Relay: Choose the relay to switch.
    5. Schedule - Optionally select a schedule when the relay may switch. You can edit these schedules under Schedule.
    6. Submit: To save the settings.

    The code will appear in the underlying table.
    If you wish to change a code, select the code in the table. The data will be transferred into the form above so that it can be adjusted.

    Important On the device, press #code# to activate it.