Qbus offers you the possibility to create scenes. An scene is a complete situation in which lighting, shutters, dimmer, etc. are controlled together so that you get a complete result in your zone. When you click the "scenes" button, the following screen appears.
The I/O’s in your configuration are displayed on the right side of the screen. In the section on the left, select "new preset". Then, by double clicking or with the → and ← keys, move the desired I/O’s to the scene you are creating. Change the values based on what you want to do by selecting the appropriate I/O and using the up or down arrows on the right side of the list.
The "Set all values" option activates all selected I/O’s while the "Clear all values" option places all I/O’s in an off state.
If you are creating two opposing scenes, complete the first scene, then create a new one with the "Copy from ..." button and copy the previous scene; then use "Clear all values", "Set all values” or use the arrows, depending on the situation you want to assign to the new scene.
Remark: If you use thermostats in your scenes, they will not change to the requested program if it is in a non-"Changeable by clock time or scene" program. These settings can be adjusted in the setup screen (Utilities – Setup – Heating/Cooling)
The scenes can be activated in various ways.
1. Button on an intelligent switch
2. Pushbuttons or switches connected to the INPUT modules, with INP02, INP04, INP08, INP16 & INP08/230.
3. DIS02 module (DIS02 IT)
4. Touch screen module (TSC 5.8, ViZiR, DIS, RoomMate …)
5. Also from the System Manager with the TEST button in the "Scenes" window shown above.
6. Logic
7. …