Relay modules

 

Relay or switch modules switch outputs. These modules are used for the control of lighting, ventilation, screens, heating, gates, ...


Choose the function of your output module

 

The Qbus relay modules have no specific function
– it is set according to the application they are used
for. A relay output can be used as an ordinary on/off
switch, but also as a push button output that is only
active when the button is pressed (e.g., a door bell)
or as a timer that only switches on the output for a
specific time. It is even possible to operate motors with
relay outputs (curtains, screens, sun awnings, ... ).

Qbus Flush-mounted wireless Easywave relay 10A 230V (QWE-REL01/230)

Relay modules

Qbus Flush-mounted wireless Easywave relay 10A potential free (QWE-REL01/230PF)

Relay modules

Two-channel smart teleruptor switching module with 230V outputs (REL02SA/230)

Relay modules

DIN rail module. Contains two 230V switched outputs and 3 inputs including 1 All Off / Panic button. Module can be used both Stand-Alone and combined with a controller (Full Qbus)

Decentral relay module 2 channel (REL02)**NEW

Relay modules

Contains 2 x 8A connected outputs and 2 inputs including LED feedback. This module fits into an integrated
box and is fed by the Qbus bus

Smart Impulse Relay (REL04SA)

Relay modules

DIN rail module. Contains 4 x 16A connected outputs and 5 inputs including 1 All Off / Panic button. Can also be used to control motors. Module...

DIN rail module. Contains 4 x 16A connected outputs and 5 inputs including 1 All Off / Panic button. Can also be used to control motors. Module can be used both Stand-Alone and combined with a controller (Full Qbus)

Relay modules

Set of 4x Relaymodule (4x 16A) with manual control, LED indication and 5 inputs.

Control module for one motor (with or without lamellae) with positioning (ROL01PSA)

Relay modules

DIN rail module. For controlling one motor. With three inputs: 1 for UP, 1 for DOWN, 1 All Off / Panic button. For controlling 230V motors...

DIN rail module. For controlling one motor. With three inputs: 1 for UP, 1 for DOWN, 1 All Off / Panic button. For controlling 230V motors for screens, roller shutters, blinds etc, includes alarm contact for a weather sensor connection so that the UP output is activated with too much wind/rain etc. Module can be used both Stand-Alone and combined with a controller (Full Qbus)

Control module for 4 motors (with or without lamellae) with positioning (ROL04PSA)

Relay modules

DIN rail module. For controlling four motors. With nine inputs: 1 for UP, 1 for DOWN for each motor outplut, 1 All Off / Panic button. For...

DIN rail module. For controlling four motors. With nine inputs: 1 for UP, 1 for DOWN for each motor outplut, 1 All Off / Panic button. For controlling 230V motors for screens, roller shutters, blinds etc, includes alarm contact for a weather sensor connection so that the UP output is activated with too much wind/rain etc. Module can be used both Stand-Alone and combined with a controller (Full Qbus)

8 channel DIN rail relay module (REL08)

Relay modules

DIN rail module. Contains 8 x 16A connected outputs. Can also be used to control motors

Qbus Wireless Easywave power plug ON/OFF 230V (Belgian version) (QWE-PP01/BE)

Relay modules