Skip to main content
QWE PP01 BE
QWE-PP01/BE

Qbus wireless Easywave BE/FR socket

  • Reliable wireless communication with the Qbus system via the Easywave protocol
  • Operates on standard mains voltage (230V AC)
  • Switch the socket off remotely, anytime and anywhere
  • Plug & play installation
  • Wirelessly control high-power devices up to 16A – ideal for lighting, coffee machines, fans, etc.
Technical info

This wireless switched socket is placed between the outlet and the device to be switched. This module switches up to 16A, and is suitable for use in Belgian and French sockets.

Frequently Asked Questions

  • How do you read an existing configuration?

    This is a completely different procedure depending on the type of controller.

    • For the CTD controllers this goes as follows:

    In the SMIII via "File" or "Utilities / Setup / SD card", click on "Recover QDB from SD".

    After confirmation you choose the name and location where the file should be saved. The zipped QDB file is then read from the SD card of the CTD and saved. With a positive answer to the question "Unzip and open restored QDB?", All data will then be immediately available. If the data you were still working on was not sent or saved, you will first receive a notification to do so.

     

    • For a CTL controller follow the following procedure:

    Because this controller does not yet have a large memory, only limited data can be recovered. Ao the names are abbreviated to 12 characters and serial numbers are not stored anywhere.

    The first step is therefore to type in ALL serial numbers via SMII via "File / Modules". These 6-digit serial numbers can be found on every module (DIN rail, switch, detector, etc.). For the SWC0x switches, an extra option was provided to have them send their serial number via “Search for modules”.

    When you then click on the "down arrow", you can read all this limited information.

  • Always use the latest software for configuration.

    It is always recommended to use the most recent version. This version supports the newest modules and resolves all known bugs.

    If, for example, you enter a serial number and the correct module information does not appear, you are likely not working with the most recent software.

    A newer version will always be able to open the older files (.QDB) without data loss.

    The latest version of the System Manager software, along with the user manual and version history, can be found in the knowledge center.

Technical info for installers

  • Function description

    The QWE PP01_BE is a wireless switched socket capable of handling up to 16A. 

  • Technical specifications

    General Specifications

    • Power Supply: 230V AC / 50 Hz
    • Consumption:
      • 0.2W standby
      • 0.8W when the relay is activated (without the load power)
    • Maximum load: 16A / 230V AC
    • Modulation coding: FSK
    • Wireless protocol: Easywave
    • Range: open field: 150m; buildings: 30m
    • Operating temperature: -10°C to 35°C
    • Maximum humidity: 93%, non-condensing
    • Maximum installation height: 2,000 meters

    Physical Specifications

    • Protection rating: IP20, EN60529
    • Sensor module dimensions: 50x120x75mm
    • Transmitter weight: approximately 158g

    CE Marking

    • Qbus declares that this product complies with all applicable European directives and regulations.
    • The EU declaration of conformity is available on our website www.qbus.be.
  • Explanation of symbols
    Symbool Dubbele isollatie

    Equipment where protection against the risk of electric contact is not only based on basic insulation but also on additional protection such as double insulation or reinforced insulation. There is no possibility for grounding.

     

    Symbool Gevaar Aandachtig lezen

    Before connecting the device, it is mandatory to read the manual of the respective product. ISO7000-0434

    Symbool Gevaarlijke spanning

    Power supply connection (230V) to the power supply connector. IEC 60417-5036

    Symbool CE

    CE conformity. All declarations of conformity are available upon request.

  • Warranty Provision

    Standard Warranty Period: 2 years from delivery date.

    The warranty is no longer valid if the module has been opened! 

    Defective modules should be sent without seal along with a description of the defect to our service department:

    QBUS N.V.

    Joseph Cardijnstraat 19

    9420 Erpe-Mere

    Belgium

    T +32 53 60 72 10

    F +32 53 60 72 19

    Email: support@qbus.be

     

General

  • Safety Regulations

    Read the full manual before installing the module and activating the system. 

    WARNING

    • The device must be installed and commissioned by a qualified electrician in accordance with country-specific regulations.
    • The device must not be opened. The warranty is void if the module is opened.

Installation and wiring

  • Installation

    Attention! Ensure there is no interference with the wireless connection. Do not install the module in a distribution box, a metal enclosure, in direct proximity to large metal objects, on or near the floor.

    Plug the QWE PP01_BE into a suitable power outlet.

  • Commissioning

    1) Plug the QWE PP01_BE into a suitable power outlet.

    Attention! Ensure there is no interference with the wireless connection. Do not install the module in a distribution box, in a metal enclosure, in close proximity to large metal objects, on, or near the floor.

    2) Follow the instructions in System Manager III to pair the module with the QWI/EW module. To place the module in learning mode, press the P button briefly. The module will then be in learning mode for approximately 30 seconds. The LED should blink at a uniform repeated rate.

    Note! If the LED does not blink at a uniform rate, repeatedly press the P button until the LED blinks at a uniform rate. 

  • Resetting the module
    1. Hold the P-button until the LED flashes rapidly.
    2. Hold the P-button again until the LED lights up. The module is now reset and will return to normal operational mode after 4 seconds.
  • Troubleshooting

    If the module shows unwanted operation:

    • The module switches on or off at an incorrect moment.
    • The relay engages for a short time and then automatically disengages.
    • The module does not respond to any command and there is certainly good reception between QWI/EW and this module.

    Then definitely try to reset the module and reconnect it to the QWI/EW using System Manager III.

    Also check the following aspects:

    • Check if the wireless connection in the installation is not disrupted between this module and the QWI/EW.
    • Check the configuration of the QWI/EW and whether the link with this module is still active.
    • Check if other wireless devices operating at the same frequency or in the immediate vicinity are interfering with the operation of this product.

For each wireless module it is important that it is enrolled to the gateway (QWI/EW)
An I/O module receives a code from the QWI/EW, an input module sends its code to the QWI/EW.

When you briefly press the push button, it will send its transmission code and store it in a free place in the QWI. The transmission code is displayed and the key pressed is displayed in green.

Qbus System Manager III Manual Update 04 2025 pdf image 479