QWZ-TH
Qbus wireless Zigbee thermostat
The QWZ-TH is a 230V powered room thermostat that can be linked to the Qbus Wireless Interface using Zigbee protocol (QWI/ZB). Thanks to the QWZ-TH room thermostat, you can control both the heating temperature and the fan speed of a fan. The module features 3 relay contacts for direct control of a fan with 3 speeds. In addition, there is a potential-free contact for heating and a potential-free contact for cooling available.
QWZ-REL02/230
Qbus wireless Zigbee relay
The QWZ-REL02/230 is a dual relay module with wireless control via the Zigbee protocol. Thanks to the wireless relay, you can implement a Qbus system even in a traditionally wired installation. This module can switch small loads such as lighting devices.
QWZ-RAD
Qbus wireless Zigbee thermostatic valve for radiators
The QWZ-RAD is a wireless motorized radiator thermostat that can be linked to the Qbus Wireless Interface with Zigbee protocol (QWI/ZB). The radiator thermostat has a round rotating and push button for adjusting the temperature. The temperature is easy to read thanks to the energy-efficient LED display. Multiple QWZ-RAD units can be installed in the same home, allowing you to easily create a multi-zone heating control in situations where a wired solution is not possible, feasible, or desirable.
QWZ-PPE/BE
Qbus wireless Zigbee socket BE/FR
The QWZ-PPE/BE is an intermediate socket that can switch up to 16A. You can use this smart socket to easily switch a connected appliance on and off. Once you plug the smart socket into a normal socket, you can locally switch the connected appliance on and off using the button on the socket.Because the smart socket has its own energy measurement and can be easily moved, you can start measuring the energy consumption of multiple devices in different locations with just one single socket.
QWI/ZB
Qbus Wireless Interface - Zigbee
The Qbus Wireless Interface - Zigbee (QWI/ZB) connects wireless Qbus Zigbee modules and products from other manufacturers with the Zigbee protocol to a Qbus system. The QWI/ZB has a maximum range of 20m indoors and up to 50m in open field. You can connect up to 15 wireless modules.
QWI/EW
Qbus Wireless Interface - Easywave
The QWI connects the wired Qbus system via the Easywave protocol with wireless components such as switch modules, switches, window and door contacts, sensors, and alarm buttons.
QWE-ROL01/230
Qbus wireless Easywave motor control module
The QWE R0L01/230 is a wireless motor control module for operating a 230V motor using a three-position controller in the Easywave protocol.
QWE-REL01/230PF
Qbus wireless Easywave relay 10A potential-free
This wireless potential-free relay is used to switch low-power devices on or off. This module can be used with both wired or wireless Qbus switches, sensors, door contacts,…
QWE-REL01/230
Qbus wireless Easywave relay 10A 230V
This 1-channel wireless relay switches devices powered by mains voltage on or off. This module can be used with both wired or wireless Qbus switches, sensors, door contacts, ...
QWE-RC04/metal
Qbus wireless Easywave remote - 4 buttons
The QWE RC04/metal is a remote control with 4 buttons. Pressing one of the buttons sends a wireless telegram that is picked up by the Qbus Wireless Interface. By configuring this in the Qbus Configuration Software, any Qbus output can be controlled with this remote control.
QWE-RC01/pulse
Qbus wireless Easywave remote - 1 button
By pressing the button on this 1-key remote control, a wireless telegram is sent, which is picked up by the Qbus Wireless interface. By configuring it in the Qbus Configuration software, any Qbus output can be controlled with this remote control.
QWE-PP01/BE
Qbus wireless Easywave BE/FR socket
This wireless switched socket is placed between the outlet and the device to be switched. This module switches up to 16A, and is suitable for use in Belgian and French sockets.
QWE-PB/IP65
Qbus wireless Easywave alarm button
Pressing the button on this waterproof 1-key remote control sends a wireless signal that is picked up by the Qbus Wireless interface. By configuring this in the Qbus Configuration software, any Qbus output can be controlled with this remote control. This button can be used as wristband, necklace or holder and thus serves as a personal alarm. Since the button is IP65 (water and dustproof), it can also be worn while showering/bathing.
QWE-MC01/white
Qbus Wireless Easywave Window/Door White Contact
The wireless window and door contact can be used to monitor the status of windows, doors, and gates. When the contact is opened or closed, a wireless signal is sent to the Qbus Wireless Interface module. The QWE MC01/white includes a built-in battery monitor. As soon as the battery capacity becomes low, a "Battery Low" telegram is sent to the Qbus Wireless Interface module so that it can in turn notify via email, SMS, or through a notification on the Cloud.
QWE-INP04/bat
Qbus wireless Easywave input module on battery
This product is ideal for making existing switches or push buttons completely wireless without any demolition work and for converting them into intelligent switches or push buttons that perform Qbus operations. The QWE INP04/bat is a battery-powered wireless transmitter that has up to 4 potential-free contacts. You can connect up to 4 push buttons or up to 2 switches to the QWE INP04/bat.
QWE-INP02/230
Qbus wireless Easywave input module at 230V
With this input module, standard 230V push buttons or switches can easily be converted to wirelessly control the wired or wireless Qbus output modules. A maximum of 2 230V push buttons or 230V switches can be connected to this wireless input module.