Search results

Smart Impulse Relay (REL04SA)

Smart Impulse

DIN rail module. Contains 4 x 16A connected outputs and 5 inputs including 1 All Off / Panic button. Can also be used to control motors. Module can be used both Stand-Alone and combined with a...

DIN rail module. Contains 4 x 16A connected outputs and 5 inputs including 1 All Off / Panic button. Can also be used to control motors. Module can be used both Stand-Alone and combined with a controller (Full Qbus)

CTD01: Mini controller

Controllers

1 bus output with maximum charge of 250mA. USB port for programming

CTD01E: Mini controller with network port for Qbus Cloud

Controllers

1 bus output with maximum charge of 250mA. USB-port and network port for programming and operation and
visualisation via Qbus Cloud

CTD01E+: Basic controller with network port for Qbus Cloud

Controllers

1 bus output with maximum charge of 500mA. USB-port and network port for programming and operation and
visualisation via Qbus Cloud

CTD02E: Full controller with network port for Qbus Cloud

Controllers

2 bus output with each maximum charge of 500mA. USB-port and network port for programming and operation and visualisation via Qbus

CTD03E: Maxi controller with network port for Qbus Cloud

Controllers

3 bus output with each maximum charge of 500mA. USB-port and network port for programming and operation and visualisation via Qbus

Qbus Controller power adapter (CTLPWS)

Power adapter 18V 2A for Qbus CTD controllers. Included with every CTD controller. 

Two channels (Stand- Alone) universal dimmer (DIM02SA)

Smart dimmer

DIN rail module to dim 2 circuits of 10-500VA.For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used...

DIN rail module to dim 2 circuits of 10-500VA.For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used Stand-Alone (without controller) as there are 3 direct inputs on board for
the connection of standard push buttons (including an All Off & Panic button).

Four channels (Stand- Alone) universal dimmer (DIM04SA)

Smart dimmer

DIN rail module to dim 4 circuits of 10-500VA. For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used...

DIN rail module to dim 4 circuits of 10-500VA. For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used Stand-Alone (without controller) as there are 5 direct inputs on board for
the connection of standard push buttons (including an All Off & Panic button).

Four channels (Stand- Alone) analogue control module for dimming and/or switching (ANR04SA)

Dimmers

DIN rail module. Has 4 outputs that can be used as
analogue dimmers (0/1-10V or PWM) or as relay outputs. This module can also be used Stand-Alone (without
Controller) as there are 5...

DIN rail module. Has 4 outputs that can be used as
analogue dimmers (0/1-10V or PWM) or as relay outputs. This module can also be used Stand-Alone (without
Controller) as there are 5 direct inputs on board for the connection of standard push buttons (including
an All Off & Panic button).

Decentral relay module 2 channel (REL02)

Relay modules

Contains 2 x 8A connected outputs and 2 inputs including LED feedback. This module fits into an integrated
box and is fed by the Qbus bus

8 channel DIN rail relay module (REL08)

Relay modules

DIN rail module. Contains 8 x 16A connected outputs. Can also be used to control motors

Four channels analogue DIN rail dimmer (ANA04)

Dimmers

Analogue dimmer module. DIN rail module to connect
4 analogue dimmers with feeds of 0-10 or 1-10V

Decentralised one channel analogue dimmer (ANA01)

Dimmers

0/1-10V dimmer with 1 output that is decentralised connected to the bus

Control module for 2 motors with positioning (ROL02P)

Motor control modules

On a ROL02P DIN rail module two 230V motors can be connected for the operation of rolling blinds, curtains, ... Every motor can be set between 0% and 100% of the running time; that setting can then...

On a ROL02P DIN rail module two 230V motors can be connected for the operation of rolling blinds, curtains, ... Every motor can be set between 0% and 100% of the running time; that setting can then be used in moods and time settings.
An internal calibration mechanism in the ROL02P ensures that every time the rolling blind or curtain is fully lifted or lowered, it is calibrated. That ensures that the requested position also remains the same after time.

Decentralised control module for 1 motor (ROL01)

Motor control modules

The decentralised ROL01 module takes power from the bus and can easily be installed in the proximity of the motor. The ROL01 module also has two inputs on board (with two LED outputs)...

The decentralised ROL01 module takes power from the bus and can easily be installed in the proximity of the motor. The ROL01 module also has two inputs on board (with two LED outputs) through which push buttons (with LED feedback) window, door and other contacts can be connected.

Decentralised module with 2 inputs (INP02)

Input modules

2 potential-free contacts (e.g. push buttons) and 2 LEDs can be connected to the INP02. These modules fit into an integrated box for switches and are an ideal solution to connect standard...

2 potential-free contacts (e.g. push buttons) and 2 LEDs can be connected to the INP02. These modules fit into an integrated box for switches and are an ideal solution to connect standard push buttons directly to the bus.

Decentralised module with 4 inputs (INP04)

Input modules

4 potential-free contacts (e.g. push buttons) and 4 LEDs can be connected to the INP04. These modules fit into an integrated box for switches and are an ideal
solution to connect standard...

4 potential-free contacts (e.g. push buttons) and 4 LEDs can be connected to the INP04. These modules fit into an integrated box for switches and are an ideal
solution to connect standard push buttons directly to the bus.

DIN rail module with 8 potential free inputs (INP08)

Input modules

On this DIN rail module 8 potential free inputs can be  connected. Via the Qbus configuration software it can be decided which function every input must have
- switch, push button, normal open or...

On this DIN rail module 8 potential free inputs can be  connected. Via the Qbus configuration software it can be decided which function every input must have
- switch, push button, normal open or normal closed.

DIN rail module with 8 inputs under voltage (INP08/230)

Input modules

This DIN rail module is used to connect external contacts under voltage (12VAC/DC or 230VAC - e.g. automatic portals) to the Qbus system.

DIN rail module with 16 potential free inputs (INP16)

Input modules

On this DIN rail module 16 potential free inputs can be connected. Via the Qbus configuration software it can be decided which function every input must have - switch, push button, normal open or...

On this DIN rail module 16 potential free inputs can be connected. Via the Qbus configuration software it can be decided which function every input must have - switch, push button, normal open or normal closed.

Red LEDs for INP02/INP04 feedback (LED10/NR)

Smart switches

These red LEDs can be integrated into Niko push-buttons for feedback from the INP02 and INP04 modules. 10 pcs.

Green LEDs for INP02/INP04 feedback (LED10/NG)

Smart switches

These green LEDs can be integrated into Niko push-buttons for feedback from the INP02 and INP04 modules. 10 pcs.

White LEDs for INP02/INP04 feedback (LED10/NW)

Smart switches

These white LEDs can be integrated into Niko push-buttons for feedback from the INP02 and INP04 modules. 10 pcs.

Blue LEDs for INP02/INP04 feedback (LED10/NB)

Smart switches

These bleu LEDs can be integrated into Niko push-buttons for feedback from the INP02 and INP04 modules. 10 pcs.

1-button Tastu White (SWC01/GW)

Smart switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass.

2-button Tastu White (SWC02/GW)

Smart Tastu Switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass.

2-button Tastu White with temperature sensor (SWC02T/GW)

Smart switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass. This version has an integrated temperature sensor.

4-button Tastu White (SWC04/GW)

Smart switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass.

4-button Tastu White with temperature sensor (SWC04T/GW)

Smart switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass. This version has an integrated temperature sensor.

1-button Tastu Black (SWC01/GB)

Smart switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass. 

2-button Tastu Black (SWC02/GB)

Smart switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass.

2-button Tastu Black with temperature sensor (SWC02T/GB)

Smart switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass. This version has an integrated temperature sensor.

4-button Tastu Black (SWC04/GB)

Smart switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass.

4-button Tastu Black with temperature sensor (SWC04T/GB)

Smart switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass. This version has an integrated temperature sensor.

4-button Niko Cream (SWC04/100)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko Cream with integrated temperature sensor (SWC04/100)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated temperature sensor. The handy second page makes it possible to control 8 outputs in...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated temperature sensor. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko Cream with motion detector (SWC04M/100)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated motion detector. The handy second page makes it possible to control 8 outputs in total...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated motion detector. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Cream 100 with integrated temperature sensor and motion detector (SWC04MT/100)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated temperature sensor, motion detector and light sensor. All the push buttons have...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated temperature sensor, motion detector and light sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko White (SWC04/101)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko White with temperature sensor (SWC04/101)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy second...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko White with motion detector (SWC04M/101)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko White with temperature sensor and motion detector (SWC04MT/101)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor, motion detector and light sensor. All the push buttons have...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor, motion detector and light sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko Sterling (SWC04/121)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko Sterling with temperature sensor (SWC04/121)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy second...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko Sterling with motion detector (SWC04M/121)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko Sterling with temperature sensor and motion detector (SWC04MT/121)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor, motion detector and light sensor. All the push buttons have...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor, motion detector and light sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko Anthracite (SWC04/122)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko Anthracite with temperature sensor (SWC04/122)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy second...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Niko Anthracite with motion detector (SWC04M/122)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-toets Niko Anthracite with temperature sensor and motion detector (SWC04MT/121)

Smart switches

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor, motion detector and light sensor. All the push buttons have...

The Qbus print plate is hidden behind the Niko push buttons. Easy to connect to the Qbus bus, with integrated temperature sensor, motion detector and light sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - White (SWC04/N)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - White with temperature sensor (SWC04T/N)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - White with motion detector (SWC04M/N)

Smart switches

he Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second...

he Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - White with temperature sensor and motion detector (SWC04MT/N)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor, motion detector and light sensor. All the push buttons have...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor, motion detector and light sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - Silver (SWC04/NT)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - Silver with temperature sensor (SWC04T/N)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - Silver with motion detector (SWC04M/NT)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - Silver with temperature sensor and motion detector (SWC04MT/N)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor, motion detector and light sensor. All the push buttons have...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor, motion detector and light sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - Black (SWC04/L)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - Black with temperature sensor (SWC04T/L)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - Black with motion detector (SWC04M/L)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated motion detector. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

4-button Bticino Light - Black with temperature sensor and motion detector (SWC04MT/N)

Smart switches

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor, motion detector and light sensor. All the push buttons have...

The Qbus print plate is hidden behind the Bticino push buttons. Easy to connect to the Qbus bus with integrated temperature sensor, motion detector and light sensor. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch.

Smart switches CJC

Smart switches

The Qbus print plate is hidden behind the CJC push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 4...

The Qbus print plate is hidden behind the CJC push buttons. Easy to connect to the Qbus bus. All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 4 outputs in total with a single 4-button switch. Check the CJC catalogue for the versions and product codes.

Smart switches Jung

Smart switches

The smart Qbus switch in JUNG version is a basic component (the 4008 TSM “pushbutton module”) with integrated Qbus print plate for connection to the Qbus two-wire bus. Various styles of JUNG...

The smart Qbus switch in JUNG version is a basic component (the 4008 TSM “pushbutton module”) with integrated Qbus print plate for connection to the Qbus two-wire bus. Various styles of JUNG buttons and cover frames (AS500, A, CD500, LS), and 1-, 2-, 3- and 4-button finishing sets suit this module. These buttons and cover frames are not supplied but must be ordered separately from the respective JUNG sale channels.

 

Via the JUNG Graphic Tool it is also possible to have symbols printed on the push buttons. The Qbus smart switches version JUNG are also available with integrated temperature sensor.

Smart switches Jung with temperature sensor

Smart switches

The smart Qbus switch in JUNG version is a basic component (the 4008 TSM “pushbutton module”) with integrated Qbus print plate for connection to the Qbus two-wire bus. Various styles of JUNG...

The smart Qbus switch in JUNG version is a basic component (the 4008 TSM “pushbutton module”) with integrated Qbus print plate for connection to the Qbus two-wire bus. Various styles of JUNG buttons and cover frames (AS500, A, CD500, LS), and 1-, 2-, 3- and 4-button finishing sets suit this module. These buttons and cover frames are not supplied but must be ordered separately from the respective JUNG sale channels.
Via the JUNG Graphic Tool it is also possible to have symbols printed on the push buttons.

This version is with an integrated temperature sensor.

Smart switches Lithoss

Smart switches

The Qbus print plate is hidden behind the Lithoss push buttons. Easy to connect to the Qbus bus.
All the push buttons have adjustable colour LEDs. The handy second page makes it possible to...

The Qbus print plate is hidden behind the Lithoss push buttons. Easy to connect to the Qbus bus.
All the push buttons have adjustable colour LEDs. The handy second page makes it possible to control 8 outputs in total with a single 4-button switch. Check the Lithoss catalogue for the versions and product codes.

Mini motion detector with white sensor (SEN01MW)

Sensors

The stylish detector SEN01M is a small motion detector that can be integrated in skirting boards, cabinets, walls, etc. The SEN01M has an integrated light sensor.

Mini motion detector with black sensor (SEN01MB)

Sensors

The stylish detector SEN01M is a small motion detector that can be integrated in skirting boards, cabinets, walls, etc. The SEN01M has an integrated light sensor.

Mini motion detector with white sensor in white metal frame for ceiling assembly (SEN01MW/RMW)

Sensors

The stylish detector SEN01M is a small motion detector that can be integrated in skirting boards, cabinets, walls, etc. or integrated in a metal frame. The SEN01M has an integrated light sensor.

Mini motion detector with white sensor in white metal frame for ceiling assembly (SEN01MB/RMB)

Sensors

The stylish detector SEN01M is a small motion detector that can be integrated in skirting boards, cabinets, walls, etc. or integrated in a metal frame. The SEN01M has an integrated light sensor.

Swivelling motion detector in white metal frame (SEN04ML/RMW)

Sensors

The SEN04ML/RMW is a motion detector for indoor use, has an adjustable detector and is built into a metal case with clips for easy wall or ceiling mounting.

Motion, light and temperature sensor for outdoor use (SEN04MLT/EYE)

Sensors

A versatile detector for ceiling or wall mounting, for outdoor use (IP65), that detects temperature, light level and motion and operates outputs based on one or a combination of these measured...

A versatile detector for ceiling or wall mounting, for outdoor use (IP65), that detects temperature, light level and motion and operates outputs based on one or a combination of these measured values.

Swivelling motion detector in Niko design colour Cream (MDI01/100)

Sensors

The MDI is a motion detector for indoor use, has an adjustable detector and an integrated light sensor.

Swivelling motion detector in Niko design colour Cream (MDI01/101)

Sensors

The MDI is a motion detector for indoor use, has an adjustable detector and an integrated light sensor.

Swivelling motion detector in Niko design colour Sterling (MDI01/121)

Sensors

The MDI is a motion detector for indoor use, has an adjustable detector and an integrated light sensor.

Swivelling motion detector in Niko design colour Anthracite (MDI01/122)

Sensors

The MDI is a motion detector for indoor use, has an adjustable detector and an integrated light sensor.

Swivelling motion detector in Bticino Light design colour White (MDI01/N)

Sensors

The MDI is a motion detector for indoor use, has an adjustable detector and an integrated light sensor.

Swivelling motion detector in Bticino Light design colour Metal (MDI01/NT)

Sensors

The MDI is a motion detector for indoor use, has an adjustable detector and an integrated light sensor.

Swivelling motion detector in Bticino Light design colour Black (MDI01/L)

Sensors

The MDI is a motion detector for indoor use, has an adjustable detector and an integrated light sensor.

Air quality sensor with CO2 and temperature sensor (AIR01CT)

Sensors

The air quality sensors contain a CO2 sensor and a temperature sensor. Based on the values measured by these sensors the ventilation system can be controlled and the optimal air quality can be...

The air quality sensors contain a CO2 sensor and a temperature sensor. Based on the values measured by these sensors the ventilation system can be controlled and the optimal air quality can be obtained without unnecessary energy loss.

Air quality sensor with humidity and temperature sensor (AIR01HT)

Sensors

The air quality sensors contain a humidity sensor and a temperature sensor. Based on the values measured by these sensors the ventilation system can be controlled and the optimal air quality can...

The air quality sensors contain a humidity sensor and a temperature sensor. Based on the values measured by these sensors the ventilation system can be controlled and the optimal air quality can be obtained without unnecessary energy loss.

Air quality sensor with CO2, humidity and temperature sensor (AIR01CHT)

Sensors

The air quality sensors contain a CO2 sensor, humidity sensor and a temperature sensor. Based on the values measured by these sensors the ventilation system can be controlled and the optimal air...

The air quality sensors contain a CO2 sensor, humidity sensor and a temperature sensor. Based on the values measured by these sensors the ventilation system can be controlled and the optimal air quality can be obtained without unnecessary energy loss.

Temperature sensor (SEN01T)

Sensors

Digital temperature sensors for easy and multi-functional integration. These sensors are fed by the bus and make the smart, zone heating control in a building extremely easy.

Temperature sensor with NTC sensor on a 55cm long cable (SEN01NTC)

Sensors

The SEN01NTC has a NTC sensor on a 55cm long cable. That sensor is ideal for use in floor heating or other measurements in which the sensor can be embedded.

Niko 101 (White) central plate with a drilled hole for the SEN01T temperature sensor (CPL SEN01T/101)

Sensors

Set of 5 Niko 101 central plates with a drilled hole for the SEN01T temperature sensor

Niko 101 (Anthracite) central plate with a drilled hole for the SEN01T temperature sensor (CPL SEN01T/122)

Sensors

Set of 5 Niko 122 central plates with a drilled hole for the SEN01T temperature sensor.

Niko 101 (White) central plate with a drilled hole for the SEN01MW motion detectors (CPL SEN01M/101)

Sensors

Set of 5 Niko 101 central plates with a drilled hole for the the motion and light sensor SEN01MW

Niko 122 (Anthracite) central plate with a drilled hole for SEN01MB motion detector (CPL SEN01M/122)

Sensors

Set of 5 Niko 122 central plates with a drilled hole for the the motion and light sensor SEN01MB.

ViZiR Room Controller Black (VIZ/KB)

Displays

With the ViZiR Room Controller you can simply and intuitively control an exit, a room, a floor, a flat. The OLED screen shows what you control. The control or scrolling to other outputs is done...

With the ViZiR Room Controller you can simply and intuitively control an exit, a room, a floor, a flat. The OLED screen shows what you control. The control or scrolling to other outputs is done with the white or black capacitive cover frame. The ViZiR has a temperature sensor on board, is fed and controlled via the bus and fits in a standard integrated box. The innovative, user-friendly technology of Qbus is now combined with minimalist design that fits into any decor.

ViZiR Room Controller White (VIZ/KW)

Displays

With the ViZiR Room Controller you can simply and intuitively control an exit, a room, a floor, a flat. The OLED screen shows what you control. The control or scrolling to other outputs is done...

With the ViZiR Room Controller you can simply and intuitively control an exit, a room, a floor, a flat. The OLED screen shows what you control. The control or scrolling to other outputs is done with the white or black capacitive cover frame. The ViZiR has a temperature sensor on board, is fed and controlled via the bus and fits in a standard integrated box. The innovative, user-friendly technology of Qbus is now combined with minimalist design that fits into any decor.

Navigator Aluminium 10,2" Alu/Black touch screen met PC (NAVALU)

Displays

10,2 inch touch screen with integrated extender (to be connected easily to an external PC) and with an integrated box-PC in aluminium
and glass. The Navigator Alu Touch Screens have a microphone...

10,2 inch touch screen with integrated extender (to be connected easily to an external PC) and with an integrated box-PC in aluminium
and glass. The Navigator Alu Touch Screens have a microphone and speakers and can also be used as a videophone screen. On the Navigator Alu Touch Screens the EQOmmand software can run, which allows you to control, visualise your building and manage the energy consumption. Also available in black - contact us for more info.

Navigator Aluminium 15,6" Black/Black touch screen with PC (NAVALU)

Displays

15,6 inch touch screen with integrated extender (to be connected easily to an external PC) and with an integrated box-PC in aluminium and glass. The Navigator Alu Touch Screens have a microphone...

15,6 inch touch screen with integrated extender (to be connected easily to an external PC) and with an integrated box-PC in aluminium and glass. The Navigator Alu Touch Screens have a microphone and speakers and can also be used as a videophone screen. On the Navigator Alu Touch Screens the EQOmmand software can run, which allows you to control, visualise your building and manage the energy consumption. Also available in black - contact us for more info.

Navigator Aluminium 15,6" Alu/Black touch screen (NAVALU)

Displays

15,6 inch touch screen with integrated extender (to be connected easily to an external PC) and with an integrated box-PC in aluminium
and glass. The Navigator Alu Touch Screens have a microphone...

15,6 inch touch screen with integrated extender (to be connected easily to an external PC) and with an integrated box-PC in aluminium
and glass. The Navigator Alu Touch Screens have a microphone and speakers and can also be used as a videophone screen. On the Navigator Alu Touch Screens the EQOmmand software can run, which allows you to control, visualise your building and manage the energy consumption. Also available in black - contact us for more info.

Navigator Aluminium 15,6" Alu/White Touch Screen with extender (NAVALU)

Displays

15,6 inch touch screen with integrated extender (to be connected easily to an external PC) and with an integrated box-PC in aluminium
and glass. The Navigator Alu Touch Screens have a microphone...

15,6 inch touch screen with integrated extender (to be connected easily to an external PC) and with an integrated box-PC in aluminium
and glass. The Navigator Alu Touch Screens have a microphone and speakers and can also be used as a videophone screen. On the Navigator Alu Touch Screens the EQOmmand software can run, which allows you to control, visualise your building and manage the energy consumption. Also available in black - contact us for more info.

Navigator Aluminium 21,5" Black/Black Touch Screen with PC (NAVALU)

Displays

21,5 inch touch screen with integrated extender (to be connected easily to an external PC) and with an integrated box-PC in aluminium
and glass. The Navigator Alu Touch Screens have a microphone...

21,5 inch touch screen with integrated extender (to be connected easily to an external PC) and with an integrated box-PC in aluminium
and glass. The Navigator Alu Touch Screens have a microphone and speakers and can also be used as a videophone screen. On the Navigator Alu Touch Screens the EQOmmand software can run, which allows you to control, visualise your building and manage the energy consumption. Also available in black - contact us for more info.

Energy Counter Module (ECM04)

(Energy) Counter Module

The ECM04 or Energy Counter Module is a module that adds the pulses it receives from a meter. It does not matter from which type of meter these pulses are transmitted as long as the contacts are...

The ECM04 or Energy Counter Module is a module that adds the pulses it receives from a meter. It does not matter from which type of meter these pulses are transmitted as long as the contacts are not under voltage. The ECM04 can receive a pulse every 250ms and add them. The system can also create an alarm for a specific number of pulses, e.g., for a green power certificate for solar panels.

Qbus – DMX connection module (SER485/DMX)

Interfaces

The Qbus DMX interface allows you to control any DMX devices (spots, moving heads, LED panels, LED strips, ...) through the Qbus system. Choose the desired colour via a colour wheel on the Cloud,...

The Qbus DMX interface allows you to control any DMX devices (spots, moving heads, LED panels, LED strips, ...) through the Qbus system. Choose the desired colour via a colour wheel on the Cloud, play a “film” with colour transitions or through a Qbus switch, or let your RGBWstrips dance to the Party mood. 


Accessoires 

Besides the DMX connection module we also provide single components to form a complete package. 


DMX Decoder (DEC45/DMX) 

The DMX decoder contains 4 channels of each 5A. 


LED power supply / driver (LEDPWS/24.120) 

LED driver 24VDC, 120W. RGBW 


LED strip (LS24/RGBW) 

RGWB LED strip of 5 metres, 24V, 72 LEDs per metre, 23W per metre. 5 years guarantee.


LEDPACK - LEDPACK/DMX 

Pack with all the components required to create additional mood through colour lighting. Available in a package with Qbus DMX interface (LEDPACK/DMX: Qbus DMX interface, RGBW LED strip, LED power supply, DMX decoder) or in a package without Qbus DMX interface (LEDPACK: RGBW LED strip, LED power supply, DMX decoder).

Qbus – Modbus connection module (SER485/Modbus)

Interfaces

Module to integrate Qbus with devices that have a Modbus (SER485) portal. The Modbus data of various devices (Daikin, Toshiba, Mitsubishi, Fujitsu, Priva, Robur) are integrated as standard in the...

Module to integrate Qbus with devices that have a Modbus (SER485) portal. The Modbus data of various devices (Daikin, Toshiba, Mitsubishi, Fujitsu, Priva, Robur) are integrated as standard in the Qbus module, for the rest the code must be added by Qbus.

Qbus weather station (QWS/APIEN)

Interfaces

The Qbus weather station measures temperature, rainfall, wind speed and luminosity (in west, east, south and north direction). Prevents overheating by automatically closing screens on the sunny...

The Qbus weather station measures temperature, rainfall, wind speed and luminosity (in west, east, south and north direction). Prevents overheating by automatically closing screens on the sunny side, or closes your sun awning if it is too windy. View all this on the Qbus Cloud.

Qbus - Duco connection module (SER485/DUCO)

Interfaces

Via this connection module a link can be made between a Qbus installation and the Duco Comfort Plus System or the Ducotronic (Plus) System. Both Duco systems provide zone-regulated outflow of...

Via this connection module a link can be made between a Qbus installation and the Duco Comfort Plus System or the Ducotronic (Plus) System. Both Duco systems provide zone-regulated outflow of polluted and/or humid air via a valve system and can be seamlessly integrated in your Qbus installation through the 2-wire bus cable.

Qbus Dali Interface (QDI01)

Interfaces

DIN rail Module to connect the Qbus system to a DALI-system (max. 64 addresses). Allows easy control and visualisation via the familiar Qbus control panels (switches, detectors, Cloud,...

DIN rail Module to connect the Qbus system to a DALI-system (max. 64 addresses). Allows easy control and visualisation via the familiar Qbus control panels (switches, detectors, Cloud, EQOmmand...) a DALI system.

Qbus Dali Interface (QDI01)

Dimmers

DIN rail Module to connect the Qbus system to a DALI-system (max. 64 addresses). Allows easy control and visualisation via the familiar Qbus control panels (switches, detectors, Cloud,...

DIN rail Module to connect the Qbus system to a DALI-system (max. 64 addresses). Allows easy control and visualisation via the familiar Qbus control panels (switches, detectors, Cloud, EQOmmand...) a DALI system.

Qbus Dali power supply (QDIPWS)

Interfaces

Dali system power supply

Qbus Dali power supply (QDIPWS)

Dimmers

Dali system power supply

Configuration software

Software

System Manager III-software: for the configuration of CTD controllers 
The System Manager III is the configuration software for the CTD01(E)(+), CTD02E, CTD03E controllers. 
Serial Manager...

System Manager III-software: for the configuration of CTD controllers 
The System Manager III is the configuration software for the CTD01(E)(+), CTD02E, CTD03E controllers. 
Serial Manager II-software: for the configuration of CTD controllers 
The Serial Manager II is the configuration software for the CTL16-32-64-256 controllers (2009 or earlier). 
This software can be downloaded free of charge from www.qbus.be.

EQOmmand (EQO)

Software

The EQOmmand software runs on a PC and enables the intuitive, user-friendly control and visualisation of a Qbus installation. The customer can easily create ground maps, allocate outputs to...

The EQOmmand software runs on a PC and enables the intuitive, user-friendly control and visualisation of a Qbus installation. The customer can easily create ground maps, allocate outputs to specific rooms, etc. Standard IP-cameras can also be easily connected to the EQOmmand. 

Via the Eco Dashboard-tab in EQOmmand all the outputs can be viewed and compared as diagrams or a meter. Electricity, water, gas, etc. meters can also be viewed. To activate EQOmmand a oneoff EQOmmand licence must be purchased.

2-button Tastu White (SWC02SA/GW)

Smart switches

4-button Tastu White (SWC04SA/GW)

Smart switches

2-button Tastu Black (SWC02SA/GB)

Smart switches

4-button Tastu Black (SWC04SA/GB)

Smart switches

Tastu 1 module Black (ADPTASTU/N1GB)

Cover plates

Coverplate Tastu in black glass for Niko material 1 module

Tastu 1 module White (ADPTASTU/N1GW)

Cover plates

Coverplate Tastu in white glass for Niko material 1 module

Tastu 2 modules Black (ADPTASTU/N2GB)

Cover plates

Coverplate Tastu in black glass for Niko material 2 modules

Tastu 2 modules White (ADPTASTU/N2GW)

Cover plates

Coverplate Tastu in white glass for Niko material 2 modules

Tastu 3 modules White (ADPTASTU/N3GW)

Cover plates

Coverplate Tastu in white glass for Niko material 3 modules

Tastu 3 modules Black (ADPTASTU/N3GB)

Cover plates

Coverplate Tastu in black glass for Niko material 3 modules

Start to Qbus

Product Pack

€1.299,00 (excl. VAT)

Start to qbus for a basic installation with 12 switched circuits and 2 universally dimmed circuits, remote control, including "all-out" and panic button, presence simulation, astronomical clock,...

Start to qbus for a basic installation with 12 switched circuits and 2 universally dimmed circuits, remote control, including "all-out" and panic button, presence simulation, astronomical clock, atmospheres, logic, ...

 

Content:

- 1 Qbus controller with ethernet, microcontroller up to 100mA-max.9 modules (CTD01EM)

- 3 smart teleruptors (3 x Rel04SA)

- 1 smart universal dimmer 10-500vA (DIM02SA)

Four channels (Stand- Alone) universal dimmer (DIM04SA)

Dimmers

DIN rail module to dim 4 circuits of 10-500VA. For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used...

DIN rail module to dim 4 circuits of 10-500VA. For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used Stand-Alone (without controller) as there are 5 direct inputs on board for
the connection of standard push buttons (including an All Off & Panic button).

Two channels (Stand- Alone) universal dimmer (DIM02SA)

Dimmers

DIN rail module to dim 2 circuits of 10-500VA.For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used...

DIN rail module to dim 2 circuits of 10-500VA.For halogen lamps, electronic and traditional transformers, incandescent lamps, dimmable CFL and 230V LED lamps. This module can also be used Stand-Alone (without controller) as there are 3 direct inputs on board for
the connection of standard push buttons (including an All Off & Panic button).

Decentralised constant light control dimmer (CLC01)

Dimmers

Decentralised module powered by the bus, with a light sensor that continuously measures the light level. The difference between the desired and actual light level is then adjusted by the CLC01 by...

Decentralised module powered by the bus, with a light sensor that continuously measures the light level. The difference between the desired and actual light level is then adjusted by the CLC01 by dimming the connected lighting more or less.

Touch Screen 5.8" Monochrome Blue, incl. power supply (TSC5.8)

Displays

The TSC5.8 touch screen can visualize and control up to 96 outputs, can be connected directly on the bus and has a built-in temperature sensor so it can also function as a thermostat. Availabl in...

The TSC5.8 touch screen can visualize and control up to 96 outputs, can be connected directly on the bus and has a built-in temperature sensor so it can also function as a thermostat. Availabl in white, black and metalcolor aluminum finishings.

1-button Tastu White (SWC01/GW)

Smart Tastu Switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass.

2-button Tastu White (SWC02/GW)

Smart switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass.

4-button Tastu White (SWC04/GW)

Smart Tastu Switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass.

2-button Tastu White with temperature sensor (SWC02T/GW)

Smart Tastu Switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass. This version has an integrated temperature sensor.

4-button Tastu White with temperature sensor (SWC04T/GW)

Smart Tastu Switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass. This version has an integrated temperature sensor.

1-button Tastu Black (SWC01/GB)

Smart Tastu Switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass. 

2-button Tastu Black (SWC02/GB)

Smart Tastu Switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass.

4-button Tastu Black (SWC04/GB)

Smart Tastu Switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass.

2-button Tastu Black with temperature sensor (SWC02T/GB)

Smart Tastu Switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass. This version has an integrated temperature sensor.

4-button Tastu Black with temperature sensor (SWC04T/GB)

Smart Tastu Switches

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These...

The Tastu® glass switch works on touch sensors concealed in the glass plate. With these capacitive touch surfaces users can control all the technologies in any given room, floor or building. These switches are fingerprint-proof: a special coating prevents smudging the glass. This version has an integrated temperature sensor.

2-button Tastu White (SWC02SA/GW)

Stand-Alone Tastu design switch

2-button Tastu Black (SWC02SA/GB)

Stand-Alone Tastu design switch

4-button Tastu Black (SWC04SA/GB)

Stand-Alone Tastu design switch

4-button Tastu White (SWC04SA/GW)

Stand-Alone Tastu design switch

1-button Tastu White (SWC01SA/GW)

Stand-Alone Tastu design switch

1-button Tastu Black (SWC02SA/GB)

Stand-Alone Tastu design switch

Qbus Dali Sensor (QDSEN)

Sensors

The Qbus Dali Sensor is a combined passive infrared (PIR) motion sensor and photocell, and is to be connected directly on a DALI network. The DALI sensor (QDSEN) suitable for installation at 2.5m...

The Qbus Dali Sensor is a combined passive infrared (PIR) motion sensor and photocell, and is to be connected directly on a DALI network. The DALI sensor (QDSEN) suitable for installation at 2.5m height with a detection range of 7m diameter

Qbus Dali Sensor "high bay" (QDSEN)

Sensors

The Qbus Dali Sensor "high bay" is a combined passive infrared (PIR) motion sensor and photocell, 

suitable for installation at a maximum height of 15 meters with a detection range of 40 meters...

The Qbus Dali Sensor "high bay" is a combined passive infrared (PIR) motion sensor and photocell, 

suitable for installation at a maximum height of 15 meters with a detection range of 40 meters in diameter

Stand-Alone DALI Broadcast Module (QDBC02SA)

Smart dimmer

Dimming 2 DALI light circuits in a simple, affordable way without programming. Up to 64 DALI devices distributed over 2 DALI circuits. Control via standard pushbuttons, including one All Off...

Dimming 2 DALI light circuits in a simple, affordable way without programming. Up to 64 DALI devices distributed over 2 DALI circuits. Control via standard pushbuttons, including one All Off button and Panic button. Qbus Stand-Alone module usable with or without controller

Stand-Alone DALI Broadcast Module (QDBC02SA)

Dimmers

Dimming 2 DALI light circuits in a simple, affordable way without programming. Up to 64 DALI devices distributed over 2 DALI circuits. Control via standard pushbuttons, including one All Off...

Dimming 2 DALI light circuits in a simple, affordable way without programming. Up to 64 DALI devices distributed over 2 DALI circuits. Control via standard pushbuttons, including one All Off button and Panic button. Qbus Stand-Alone module usable with or without controller

Four channels (Stand- Alone) analogue control module for dimming and/or switching (ANR04SA)

Smart dimmer

DIN rail module. Has 4 outputs that can be used as
analogue dimmers (0/1-10V or PWM) or as relay outputs. This module can also be used Stand-Alone (without
Controller) as there are 5...

DIN rail module. Has 4 outputs that can be used as
analogue dimmers (0/1-10V or PWM) or as relay outputs. This module can also be used Stand-Alone (without
Controller) as there are 5 direct inputs on board for the connection of standard push buttons (including
an All Off & Panic button).

Full Qbus

The smart, central Qbus controller
connects all the different technologies

Qbus Stand-Alone

Prepares your home for the future: easy, affordable
and expandable entry-level home automation

Ubie

Connects your Internet of Things devices with
each other and with the home automation system

Qbus cloud

Controls your smart home wherever you
are, using whatever device

Tastu

The smart touch-sensitive switch in fingerprint-proof glass with corresponding cover plates

Qbus care

The solution for healthcare institutions and service apartments

New version Qbus System Manager III (V3.16.02)

The new version of the Qbus System Manager is online.

Qbus, Plug-in, play together & let it grow BATIBOUW 2018.

 

From Thursday 22 February to Sunday 04 March 2018, the palace gates of Brussels Expo will open for the 59th edition of BATIBOUW. And indeed, also Qbus is back again. Jump in & plug-in. We fill Palace 9 with smart solutions on stand number: 09204B.

Welcome Sébastien and Maaike

Two new colleagues recently joined Qbus. Sébastien Poesmans brings his skills to our sales team while Maaike Verdoodt fronts our reception desk. 

New version Qbus System Manager III (3.15.0)

The new version of the Qbus System Manager is online. This new version includes our new controller (CTD01Em) from the Start To Qbus pack

Qbus - Proud to participate in Re-Art

Re-Art, a project in which entrepreneurs and artists join forces to raise money for charity. Qbus will be there, will you join us? Re-Art, a project in which entrepreneurs and artists join forces to raise money for charity. Qbus will be there, will you join us?

Test our free Qbus Cloud e-mail and SMS service

You can control or visualise your home or building in the Qbus Cloud, whenever and wherever you are, with any smartphone, tablet or computer. But you will only fully understand the Qbus Cloud’s real power when you connect your Smart Home to an e-mail or text messaging service.

Software engineer (Linux)

Erpe-Mere

Lighting

Simple on/off lighting with a standard switch or creating the right atmosphere with colour-changing LEDs.

Blinds

Qbus prevents overheating in buildings by automatically closing the screens in rooms where the sun shines in.

Heating, cooling & ventilation

Control the temperature in your home with your smartphone, have the Qbus self-learning clock do this or save energy using night ventilation.

Security

The “All Off” atmosphere is executed by activating the alarm. Receive a text message when someone is walking around your garden or an e-mail with a photo of the person at your door.

Measurement

Charts show how much water or energy you consumed, display the average temperatures, presence, CO2 levels and much more.

Multimedia

Activate the “Party” atmosphere using the switch in your living room to turn on the right lights, close the screens and play the right playlist.

Two showrooms, two systems, one interface

Two showrooms with two different systems, effortlessly controlled via a single tablet and interface. In brief, that’s the technology behind the two freshly renovated showrooms for Lunoo, a lighting manufacturer focusing on the retail market. Qbus, who specialises in smart technology, overhauled the showrooms to deliver a flawless, user-friendly installation.

Highquality, future-oriented technologies in loft apartment

For his own loft apartment Olivier Salens opted for the Full
Qbus system. “In my capacity as an architect I obviously
know how residential building activities develop, and I was determined to have high-quality, future-oriented technologies in my own apartment.

Residential building project: ready for the future with Qbus

“ Qbus Stand-Alone gave us the opportunity to offer a limited budget-priced basic functionality whose added value is recognised by all purchasers.” Frederik Huys

Health centre Assenede GPs, specialists and Qbus in one location.

“All these techniques are controlled by Qbus, ensuring the user can easily operate everything without making manners much less complicated.” Jurgen Van De Walle -ProHeating Systems

Tastu, the story

The story behind the Tastu is the story of different people, including Alexandre, Tom, installers and architects.

Up in the clouds with Qbus cloud

Sophia and Ricardo bought an old villa back in 2010.
They decided to renovate it from top to bottom − they
wanted to retain the atmosphere and charm of the
dwelling but nonetheless opted for a future-oriented
building approach based on new technologies.

Asse fire station

Brand-new fire station in Asse, Belgium integrates
automation applications for shorter response
times, more energy efficiency and comfort.

Efficiency and comfort in Avondzon residential care center

Seniors, residents of Residential Care Centre Avondzon, and their caretakers greatly appreciate the comfort provided by the Qbus installation. The high level of satisfaction perfectly complements the excellent reputation Avondzon enjoys around Aalst.

 

Well worth the investment - Carlos Thysebaerdt, Director at Avondzon

Tastu, the smart touch-sensitive switch

Tastu, the smart touch-sensitive switch

Tastu, the smart touch-sensitive switch

Programmation DMX module

Programmation DMX module

Teamviewer - quick support

Teamviewer - quick support

Qbus SM3 Setup V3.10.0

SMII - Setup V2.6.3

User Manual System Manager III

User Manual System Manager III

User Manual System Manager III

SMII - Setup V2.6.8

Bas- 2 Scenes on 1 button (long and short push)

Bas- 2 Scenes on 1 button (long and short push)

Bas- 2 Scenes on 1 button (long and short push)

Bas- 2 Scenes on 1 button (long and short push)

Project Calculator version 3.0.15

Project Calculator version 3.0.15

Programmation QDI module

Programmation QDI module

RMA (return material authorisation) form

RMA (return material authorisation) form

RMA (return material authorisation) form

Qbus SM3 Setup V3.10.1

SM II - Setup V2.6.6

Qbus 1-minute animation video

Qbus 1-minute animation video

Project Calculator version 3.0.15

Project Calculator version 3.0.15

>>> Qbus SMIII Setup V3.16.2 (Latest version form July 4 2018)

>>> Qbus SMIII Setup V3.16.2 (Latest version form July 4 2018)

>>> Qbus SMIII Setup V3.16.2 (Latest version form July 4 2018)

From Qbus Stand-Alone to Full: prepare your home for the future

From Qbus Stand-Alone to Full: prepare your home for the future

Project Calculator version 3.0.15

Project Calculator version 3.0.15

Bas -Relais and Dimmer controlled by intelligent switch

Bas -Relais and Dimmer controlled by intelligent switch

Bas -Relais and Dimmer controlled by intelligent switch

Bas -Relais and Dimmer controlled by intelligent switch

Description software releases

Description software releases

Description software releases

Qbus SMIII Setup V3.15.0 (25/9/2017)

Qbus SMIII Setup V3.15.0 (25/9/2017)

Qbus SMIII Setup V3.15.0 (25/9/2017)

Bas - Shutter controlled by an intelligent switch

Bas - Shutter controlled by an intelligent switch

Bas - Shutter controlled by an intelligent switch

Bas - Shutter controlled by an intelligent switch

Upgrade ethernet port on controller

Upgrade ethernet port on controller

Upgrade ethernet port on controller

Qbus SMIII Setup V3.14.0 (28/8/2017)

Qbus SMIII Setup V3.14.0 (28/8/2017)

Qbus SMIII Setup V3.14.0 (28/8/2017)

Qbus SMIII Setup V3.13.2 (13/4/2017)

Qbus SMIII Setup V3.13.2 (13/4/2017)

Qbus SMIII Setup V3.13.2 (13/4/2017)

St - Multiple detectors in same room

St - Multiple detectors in same room

St - Multiple detectors in same room

Update User Manual System Manager III

Update User Manual System Manager III

Update User Manual System Manager III

St - Relais and dimmers simultaneously controled via multilink

St - Relais and dimmers simultaneously controled via multilink

St - Relais and dimmers simultaneously controled via multilink

St - Relais and dimmers simultaneously controled via multilink

St - Shutters and screens simultaneously controled via multilink

St - Shutters and screens simultaneously controled via multilink

St - Shutters and screens simultaneously controled via multilink

St - Shutters and screens simultaneously controled via multilink

St - Multizoen heating with one boiler

St - Multizoen heating with one boiler

St - Multizoen heating with one boiler

St - Close awning when too much wind

St - Close awning when too much wind

St - Close awning when too much wind

St - Shutters or screens operated by daytime

St - Shutters or screens operated by daytime

St - Shutters or screens operated by daytime

Av - Push short (On-Off) - long (scene)

Av - Push short (On-Off) - long (scene)

Av - Push short (On-Off) - long (scene)

Av - Dimmer controlled by day or Night (logic)

Av - Dimmer controlled by day or Night (logic)

Av - Dimmer controlled by day or Night (logic)

Av - Dimmer controlled by day or Night (logic)

Av - Dimmer controlled by day or Night (CTD FW>=3.04)

Av - Dimmer controlled by day or Night (CTD FW>=3.04)

Av - Dimmer controlled by day or Night (CTD FW>=3.04)

Av - Dimmer controlled by day or Night (CTD FW>=3.04)

Av - Dimmer controlled with detectors and buttons if day or Night (logic)

Av - Dimmer controlled with detectors and buttons if day or Night (logic)

Av - Dimmer controlled with detectors and buttons if day or Night (logic)

Av - Dimmer controlled with detectors and buttons if day or Night (logic)

Av - Turn on lighting when the alarm is switched off after sunset

Av - Turn on lighting when the alarm is switched off after sunset

Av - Turn on lighting when the alarm is switched off after sunset

Av - Turn on lighting when the alarm is switched off after sunset

Av - Dim SWC Leds during night

Av - Dim SWC Leds during night

Av - Dim SWC Leds during night

The bus communication LED continues to burn

The "Bus" LED on the CTD shows when there is bus activity. A short heartbeat is shown every 5 seconds. When a module 'wakes up' the bus, the LED will be red. But it must turn off after a few seconds. However, if this "Bus" LED is continuously lit, this is probably due to a contradictory configuration. eg. An input that is set as "Normally open" or "Normally closed" can not be forced. The same applies to an output that is connected to a detector. Or conflicting logic was used... This continuous bus communication must certainly be remedied.

My computer does not get connected through USB.

Normally when the Qbus System Manager III SW is installed, the USB driver is installed automatically, but if this is not the case your computer will tell you, once you connect to the controller, that it is having trouble installing the USB device. When this happens please click on that message and select to install the driver from a list or specific location (search: C:\Program Files (x86)\Qbus\CTD USB driver if you have left the program to install in the default location and if not select the location were you have installed the program and this specific folder) . This way the system should connect properly.

No results found